by Is your Maytag washer giving you trouble? Don’t panic! A simple reset can often solve common issues like error codes, stuck cycles, or unresponsive controls.
Resetting your Maytag washer is a quick and easy process that you can do at home without any special tools.
In this guide, we’ll walk you through several methods to reset your Maytag washer, covering different models and situations.
Whether you have a top-loader, front-loader, or even a coin-operated machine, we’ve got you covered.
How To Reset a Maytag Washer?
Let’s dive in and get your washer back to its best performance!
Why You Might Need to Reset Your Washer?
Before we dive in, let’s talk about why you might need to reset your Maytag washer:
- It’s showing an error code.
- A wash cycle is stuck.
- There was a power outage.
- The washer isn’t responding to button presses.
If you’re facing any of these problems, a reset might help.
Maytag Washer Models Covered
This guide works for many Maytag washer models, including:
- A101, A102, A102S, A103, A103S, A104
- LAT9416AAE
- MAH3000AWW, MAH4000AWW, MAH5500BWW, MAH8700AWW
- MAV6200AWW, MAV7600AWW
- MHWE200XW00
- MVWC300VW1, MVWC415EW2, MVWC6ESWW1, MVWX655DW1
- PAV2200AWW, PAV2300AWW, PAVT234AWW
Don’t worry if you don’t see your exact model. These methods often work for other Maytag washers too.
Before You Start to Reset a Maytag Washer:
Safety First! Make sure your washer isn’t running a cycle when you try to reset it. If it is, wait for it to finish. This keeps you safe and protects your washer.
Method 1: The Power Reset
This is the easiest way to reset your Maytag washer.
Here’s how:
- Turn off the washer using the control panel.
- Unplug the washer from the wall outlet.
- Wait for 3 minutes.
- Plug the washer back in.
- Turn it on and test it.
If this doesn’t work, try unplugging it for 10 minutes instead of 3.
Why This Works: Cutting the power lets the washer’s electrical charge drain away. This can clear up small glitches.
Method 2: The Button Combo
If unplugging didn’t work, try this:
- Press the Power/Cancel button.
- Choose a new wash cycle.
- Press the Start/Pause button.
- Run an empty test cycle to check if it worked.
Tip: Maytag washers don’t have a specific reset button. But pressing buttons in this order can reset the machine.
Method 3: The Standby Mode Reset
This method is a bit trickier, but it can work when others fail:
- Press and hold Start/Pause for 3 seconds to enter standby mode.
- All lights should be turned off.
- Turn the Cycle Selector knob slowly clockwise.
- Within 6 seconds, do these steps:
- Turn the knob right one click, wait half a second
- Turn right one more click, and wait half a second
- Turn right one more click, and wait half a second
- Turn left one click, wait 30 seconds
- Turn right one click
- Check if all LCD lights are on, except the lid-locked light (it should blink).
- Keep turning the selector until only Wash, Rinse, and Done are lit.
- Press Start once.
- Unplug the washer.
- Wait 10 seconds, then plug it back in.
The washer should be off with no lights on. If it starts up within 10 seconds, the reset doesn’t work. You can try again, maybe a bit faster or slower.
Method 4: The Lid Lift (For Top-Loaders)
This only works for top-loading Maytag washers:
- Unplug the washer for one minute.
- Plug it back in.
- Within 30 seconds, lift and close the lid 6 times in 12 seconds.
- Make sure the lid closes properly each time.
- Run a test cycle to check if it worked.
For Coin-Operated Maytag Washers
If you’re dealing with a coin-operated Maytag washer, try this:
- Unlock the coin box to enter program mode.
- Find the Delicates and Knits option on the display.
- Press and hold this button for 5 seconds.
- The display should flash, showing the washer has reset.
- Run a test cycle to make sure it worked.
What If None of These Work?
If you’ve tried all these methods and your Maytag washer still isn’t working right, it might be time to call a pro. The problem could be with the control board or another complex part.
Understanding Maytag Washer Error Codes
Sometimes, your washer might show an error code. Here are some common ones:
| Error Code | What It Means |
|---|---|
| F1E1 | The main control board problem |
| F2E1 | Stuck key or button |
| F3E1 | Water temperature sensor issue |
| F5E2 | Door lock problem |
| F5E3 | Door switch issue |
If you see these codes, try a reset. If the code comes back, you might need a repair.
Tips to Keep Your Maytag Washer Happy
To avoid needing resets in the future, try these tips:
- Don’t overload it: Too many clothes can strain the washer.
- Use the right detergent: Too much soap can cause problems.
- Clean it regularly: Wipe it down and run empty hot water cycles monthly.
- Leave the door open: This helps prevent mold and bad smells.
Frequently Asked Questions
- Q: Can I reset my Maytag washer during a cycle?
A: It’s best to wait until the cycle is done. Stopping mid-cycle can cause issues.
- Q: How often should I reset my Maytag washer?
A: You should only reset when there’s a problem. It’s not a regular maintenance task.
- Q: Will resetting erase my custom settings?
A: Usually not. Most resets just clear temporary glitches.
- Q: What if my washer keeps needing resets?
A: If you’re resetting often, there might be a bigger problem. It’s time to call a repair person.
Also Check:
- Why Does Kidde Smoke Alarm Blinking Red
- Why Are My Home Lights Flickering
- Why is My Garage Door Sensor Blinking Red
Wrapping Up:
Resetting your Maytag washer can fix many common issues. Start with the simplest method – unplugging it.
If that doesn’t work, try the other methods we’ve covered.
Remember, if you’re not comfortable doing this or if the problems continue, it’s okay to ask for help. A professional can spot issues you might miss.
Taking care of your washer can help prevent many problems. Clean it regularly, use it correctly, and don’t ignore small issues.
With good care, your Maytag washer can serve you well for many years.
Need More Help?
If you’re still stuck, don’t worry. Here are some places to get more information:
- Maytag Customer Service: They can offer model-specific advice.
- Your Washer’s Manual: It often has troubleshooting tips.
- Online Forums: Other Maytag owners might have faced similar issues.
- Video Tutorials: Sometimes, seeing the process can help a lot.
Remember, your washer is a complex machine. It’s okay if you can’t fix every problem on your own.
The most important thing is to use it safely and know when to call for expert help.
By following this guide, you should be able to reset your Maytag washer and get back to clean clothes in no time.
Good luck, and happy washing!
