Dyson Airwrap Blinking White Light – Causes & Fix


You just finished your routine Dyson Airwrap filter cleaning, feeling satisfied. Suddenly an unexpected blinking white light appears leaving you puzzled and concerned that something is still wrong. Don’t worry, this blinking light is quite common but also confusing if you don’t know what it means or how to properly fix it.


This handy guide will explain what that mysterious blinking white light signifies and the straightforward troubleshooting steps to get your Airwrap working perfectly again. We’ll dig into why it happens, from a choked filter to confused sensors and overheating issues. You’ll discover clear solutions to unclog, dry out, reset, and restore normal function when the blinking begins.

Arm yourself with the knowledge to decode and resolve Dyson’s cryptic Morse code-like blink signals on your own. Our practical troubleshooting tips will build confidence that you’ve got this covered. We’ll even advise when it’s wise to seek extra assistance from Dyson’s helpful support pros if the DIY approach fails.

So read on to finally solve the riddle of the blinking light, keeping your Dyson in top shape for flawless, long-lasting blowouts.


Dyson Airwrap Blinking White Light

Dyson Airwrap Blinking White Light


What Do the Lights on My Dyson Airwrap Mean?

Before diving into causes and fixes, let’s decode what the different light signals represent:

  • Red light: Indicates overheating or a serious issue needing repair before use.
  • White blinking light: Gentler notification to clean the filter so the Airwrap functions optimally.
  • Blue light: Rare, but may appear if a specific issue like low airflow is detected.

So in essence, the multi-colored flashing is the Airwrap’s communication system alerting you to pause and address a particular problem. Listening and responding means preventing bigger failures down the line.

Now, let’s explore why the white light blinks and how to troubleshoot it!


Why is My Dyson Airwrap Blinking White Light?

There are a few common culprits behind a blinking white light:

  • Clogged filter: Residual dirt, dust, and hair products can choke the filter over time. The light is a plea to “wash me!”
  • Airflow blockage: Lint, hair, or other particles limiting air movement triggers the blinking alert.
  • Damp filter: If freshly rinsed, moisture may remain, causing the light cascade.
  • Confused sensors: Sudden environmental changes like temperature swings seem to disorient the sensitive electronics.

So in most cases, the blinking white light requires simple filter cleaning, airway clearing, or component resetting – easy DIY fixes we’ll cover next.

Troubleshooting Steps to Fix Dyson Airwrap Blinking White Light Issue:

Follow this handy troubleshooting guide if your Dyson is blinking white:

Step 1: Reset Your Dyson Airwrap

  • Unplug the Airwrap and leave it off for 1 minute. This “power nap” might resolve minor issues.
  • Plug back in and switch on. Check if the light blinking has ceased.

Step 2: Thoroughly Clean the Filter

  • Remove filter from handle base (consult manual for exact location).
  • Rinse under cool water only – no soap! Shake off excess moisture.
  • Let air dry completely before returning to the handle base.
  • Ensure tight, secure fit.

Step 3: Check Airflow Pathways

  • Confirm filter is fully dry and locked in position
  • Examine inlet/outlet openings for blockages
  • Carefully dislodge and remove debris like hair, lint, etc.

Step 4: Reset Sensor Detection

  • With Airwrap plugged in and switched off, press and hold the power button for 10 seconds
  • Release and wait briefly before powering back on
  • Check if the blinking light disappeared

Step 5: Contact Dyson Support

If the blinking light persists despite the troubleshooting efforts above, connecting with Dyson experts is the next recommended step:

  • Call the customer helpline specific to your country. Locate the number on the Dyson website or product manual.
  • Use online support via live chat or email form submission.
  • Provide your Airwrap model and serial numbers when contacting support for fast assistance.

Thoroughly explain the blinking light symptom and troubleshooting efforts to date. Dyson can then diagnose and pinpoint any underlying operational issues.

What Causes the Dyson Airwrap White Light to Blink?

While troubleshooting brought relief to many, the root causes remain a bit of a mystery. Let’s explore the commonly speculated culprits behind the blinking white light in more detail:

1. Clogged or Dirty Filter

This porous foam filter protects the Airwrap’s inner workings from dust, airborne debris, and residue accumulation over time.

But after months of use, even with regular cleaning, filters eventually get saturated with gunk which can spark the blinking light. Signs it’s choking:

  • Visible dirt and discoloration
  • Reduced airflow strength
  • Unusual motor noise
Troubleshooting filter issues:
  • Rinse under cool water until foam regains whiteness
  • Gently brush debris away
  • Air dry completely before reinserting
Preventative tips:
  • Clean filter at least monthly
  • Buy replacement filters so you always have a clean backup

2. Blocked Airflow

For peak performance, your Airwrap needs unobstructed airflow to channel heat and shape hair. But stuff getting lodged in its inlet or outlet openings can disrupt air movement, activating the blinking light.

What causes blockages?
  • Pet hair/lint around floor vents
  • Dust buildup inside the handle
  • Product residue gumming up the pathway
To troubleshoot:
  • Use a microfiber cloth to dust inlet/outlet exteriors
  • Use a cotton swab dipped in rubbing alcohol to dislodge stuck-on debris inside openings
  • Check/clear the fan pathway and heat sink under the filter
Prevent it next time:
  • Use external dust filters/sheets on floor vents
  • Keep long hair pulled back when using

3. Moisture Inside Handle

While the detachable heads are water-resistant, the Airwrap handle should not get wet as moisture in electronics equals trouble!

But accidents happen. If internal humidity sensors detect dampness, it manifests as a blinking white light.

Causes include:
  • Not fully drying filter before reinserting
  • Using wet attachment heads
  • Spill mishaps
To troubleshoot:
  • Remove filter/attachments and let base air dry for 24 hours
  • Place in a sealed bag with desiccant packs
  • Once completely dry, reattach the pieces
Prevent it:
  • Never submerge base
  • Dry pieces fully before clicking into place

4. Overheating Issues

With its powerful motor, the Airwrap puts out some serious heat. If the interior temperature exceeds optimal levels, overheating sensors trigger the blinking light.

What makes it overheat?
  • Blocked air vents
  • Using the highest heat settings excessively
  • Failing fan or damaged heating element
Troubleshooting overheating:
  • Clean filter/vents
  • Use lower heat settings
  • Let the unit rest for 10 minutes between uses
  • Consider replacing internal fan/heating parts
  • Don’t block vents during use
  • Alternate heat settings
  • Clean filter routinely

So in essence, the blinking light is alerting you to take action before small problems lead to more concerning meltdowns or electrical issues.

Frequently Asked Questions About Dyson Airwrap Lights

Still, puzzled over aspects of your Dyson’s light show?

Here are answers to some commonly asked questions:

  • Why does my Dyson Airwrap have a blinking white light after I clean the filter?

This typically happens if the filter is still damp. Make sure to let it dry completely before reinserting back into the handle.

  • How can I stop my Dyson Airwrap from blinking white?

The most common solution is to thoroughly clean or replace the filter if dirty. Also, check for airflow obstructions near the inlets and outlets.

  • Why does my Dyson Airwrap blink white when using it?

This usually indicates there is some kind of blockage in the airflow pathway. Check the filter, vents, and fan openings for debris buildup.

  • What should I do if my Dyson Airwrap white light keeps flashing?

First, try resetting the styler and cleaning the filter. If the blinking persists, contact Dyson support for diagnosis and repair options.

  • Is it safe to use my Dyson Airwrap if the white light blinks?

It’s not recommended. The blinking is typically an indicator of an issue needing attention. Using it could lead to further device damage.

  • Can I stop the blinking white light by just unplugging it?

The light will stop when it’s unplugged or turned off. But when powered back on, the blinking will resume if the underlying cause still exists.

  • Why does my Dyson Airwrap work but keep blinking white?

Most likely there is a minor airflow obstruction or sensor error causing the blinking. Try a reset and thorough clean before use.

  • How do I reset my Dyson Airwrap when the light blinks?

To reset, hold down the power button for 10+ seconds until it powers down, then unplug and plug back in.

  • Does the Dyson Airwrap white light blinking need a repair?

Try troubleshooting first. But if blinking persists after attempts to clean and reset, professional repair may be required.

  • Where can I get my Dyson Airwrap repaired?

You can arrange repair services through Dyson’s support team online or by phone. Some electronics repair shops may also service Dysons.

Also Check:

In Conclusion: Decoding and Fixing Dyson’s Blinking White Light:

While many appliances would simply stop working with little helpful hints about internal issues, Dyson’s colorful light communication system aims to provide guidance.


The blinking white light specifically indicates it’s time to pause and check the filter and airflow paths. Then either give it a reset or connect with tech support for repair before sparks, smoke or irreparable damage occurs!

So next time your Dyson Airwrap starts frantically blinking after cleaning, no need to panic. Just follow our troubleshooting tips to get your high-tech hot tool happy again.

Paying attention to the light cues means you’ll enjoy salon-quality blows at home for years to come!

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *