Blendjet Flashing Red and Purple Lights – Fix


As a proud owner of the innovative Blendjet portable blender, you likely enjoy the convenience of blending nutritious smoothies, protein shakes, and other beverages on the go.


However, you may have experienced the frustration of seeing those blinking red and purple lights suddenly appear, signaling an issue.

Before you panic, rest assured this problem is common and can be easily fixed with some troubleshooting. In this comprehensive guide, we will walk you through the ins and outs of diagnosing and resolving a blinking Blendjet step-by-step.

Blendjet Flashing Red and Purple Lights

Blendjet Flashing Red and Purple Lights



You’ll learn what causes those pesky blinking lights, foolproof ways to fix the issue, tips to avoid it happening again when to call in a professional, and answers to frequently asked questions.

With the right information and a few simple actions, you’ll get your smoothie-making powerhouse up and running again in no time. So read on to become a Blendjet repair expert!

What Causes the Blendjet Blinking Lights?

When you notice those blinking red and purple lights on your Blendjet, it is trying to alert you to an underlying issue. But what exactly is the cause? Here we break down the most common reasons behind the flashing signals:

  • Low Battery: Low battery charge is the number one culprit for blinking lights. Blendjets operate on rechargeable lithium-ion batteries. When the power runs low, you’ll get the red/purple blink warning.
  • Blocked Blades: Food particles, leafy greens, or other debris can sometimes get lodged near the blades, preventing them from spinning properly. This triggers the blinking light indicator.
  • Overheating: Using the blender continuously for too long can cause the motor or battery to overheat. Blinking lights indicate it’s time to let the device cool off.
  • Faulty Motor: If the motor is damaged or components are worn out, this can cause poor functionality and blinking lights.

By understanding the root of the problem, you can take appropriate steps to get your device humming again. Usually, it’s an easy fix, but occasionally you may need to contact Blendjet support.


Step-by-Step Instructions to Fix Blinking Lights

Follow this failproof sequence of troubleshooting tips to stop your Blendjet from blinking at you:

Reset the Blendjet

The first course of action is to try a simple reset:

  • Turn the blender OFF and disconnect it from any power source
  • Remove the jar/cup from the base
  • Locate the tiny reset button on the bottom of the base
  • Press and hold the button for 8-10 seconds
  • Reconnect power, replace jar and turn ON

This resets the motor and should resolve any minor technical glitches. Try blending – if the lights continue blinking, move on to the next steps.

Charge the Battery

Low battery is the most common reason for blinking blender lights.

  • Confirm the battery has a full charge before use
  • Connect to a power source with the USB charging cable
  • Verify that the charging light turns solid green
  • Leave to charge for at least 2-3 hours minimum
  • Try operating after charged

If it now works correctly, huzzah! Just be sure to fully charge between uses. If not, there may be another issue, so continue troubleshooting.

Check for Blockages

Debris lodged near the blades can prevent them from running smoothly:

  • Remove the jar from the base and inspect the blades
  • Carefully dislodge any bits of food, greens, etc. near the blades
  • Clear any gunk inside the jar with a spoon
  • Rinse blender parts thoroughly after cleaning
  • Reassemble the jar and try blending

This should allow blades to spin properly again. If the lights keep blinking, proceed to the next steps.

Let Unit Cool

An overheated battery or motor will cause the blinking light warning.

  • Power OFF and unplug blender
  • Separate all parts and let cool for 30 minutes
  • Do not actively cool or add water
  • Reassemble and try using after the cooling period

Avoid extended high-speed blending sessions to prevent overheating issues.

If you’ve tried all troubleshooting tips with no success, there may be an internal issue needing professional service. Move to the next section for prevention tips and when to call for repairs.

Avoid Future Blinking Light Incidents

While blinking lights generally signal an easy fix, you want to try to prevent this from occurring as much as possible. By incorporating the following practices, you can avoid headaches and keep enjoying smooth blending:

Properly Clean the Blendjet

  • Always disassemble and wash parts after each use
  • Use mild dish soap and warm water only
  • Thoroughly dry all components before storing
  • Never submerge the base motor in the water!

Regular cleaning prevents residue buildup which can block blades and cause poor functionality over time.


Store Blender Correctly

Be mindful of how you store your Blendjet to maximize longevity:

  • Keep stored in a cool, dry location
  • Do not place heavy objects on top
  • Store jar separate from blades with both fully dried
  • Use a protective bag or case during transport

Proper storage habits prevent damage which could cause technical issues eventually.

Handle with Care

This portable blender is designed for travel resilience, but be gentle nonetheless:

  • Avoid dropping device
  • Do not try to sharpen blades
  • Keep away from extreme heat or cold
  • Do not try to disassemble the motor

Treating your Blendjet with care means it will deliver reliable performance anywhere you need it.


By making blade debris clearing, battery charging, and storage/handling best practices part of your routine usage, you can avoid those undesirable blinking lights!

When to Call In a Professional?

While most blinking light causes can be fixed with basic troubleshooting, sometimes the problem requires a professional repair technician.

Here are indicators it’s time to seek expert Blendjet service:

  • Repeated blinking after troubleshooting

If lights continue blinking intermittently despite your best DIY efforts, there is likely an internal electrical or mechanical failure needing specialist attention.

  • Visible damage

Dropping your Blendjet or otherwise causing exterior harm can affect internal parts too. Any visible cracks, dents, leaks, etc. warrant a call to a repair expert.

  • Strange noises

Grinding, buzzing and other odd sounds are a red flag that something is amiss internally, like an imbalanced blade or wearing out motor.

Overpowering odors

Smoke or burning smells indicate defective wiring, while mildew odors mean moisture compiled internally over time – both need professional intervention.

Don’t hesitate to call in backup if you’ve exhausted all troubleshooting tips! Using or trying to repair a severely malfunctioning unit could be unsafe.


Searching for “Blendjet repair near me” is the easiest way to find certified technicians in your region who can accurately assess the issue and get your device revived promptly.

Frequently Asked Questions about Blinking Blendjet Lights

Here we answer some of the most common questions about dealing with blinking red and purple lights on your Blendjet:

  • Why does my Blendjet keep blinking while charging?

A steady blinking while connected to a charger usually means the battery is completely depleted and may take longer than usual to recharge fully. Leave it charging undisturbed for a few hours minimum.

  • Can I use my Blendjet if the light is blinking?

It’s not advisable to keep using your blender if the LED light is flashing. This indicates there is some kind of issue that needs to be addressed.

  • How can I tell if my Blendjet battery needs replacing?

If the battery no longer holds adequate charge between full charging sessions, it likely needs to be replaced by an authorized service technician.

  • Is there a reset button on Blendjet?

Yes, on the underside base, there is a small pinhole reset button. Press for 8-10 seconds with the device powered off to hardware reset.

  • Why does my Blendjet keep stopping and starting?

This usually signals an overloaded motor or loose component. Try resetting the blender and avoid overfilling the jar. If the issue continues, seek repairs.

More Kitchen Appliance Fixing Guides:



Seeing that red and purple disco party on your Blendjet can be disconcerting, but in most cases, it signals only a minor issue that just needs some attentive troubleshooting. With a few simple maintenance steps, you’ll typically have it whirring reliably again in no time.

Be sure to rule out quick fixes like insufficient battery charge and clearing blade obstructions first. Follow proper cleaning and storage habits religiously to avoid technical hiccups down the road.

And don’t hesitate to call in a professional for assistance if problems persist despite your best efforts.

With these handy tips, you can feel empowered to revive your Blendjet when those blinking lights appear and keep enjoying delicious blended creations anywhere life takes you!


You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *