Ooze Pen Blinking Green – Reasons, Fix, Causes, Tips 2024

Ads

As a proud owner of an Ooze vape pen, there’s nothing more frustrating than seeing your device begin incessantly blinking green when you try to use it.

Ads

This blinking light typically indicates there’s some kind of issue needing troubleshooting before you can continue vaping.

Let’s Understand Why Is Your Ooze Pen Blinking Green?

Ooze Pen Blinking Green

Ads

In this complete guide, we’ll cover all the potential reasons your Ooze pen may be blinking green and actionable solutions to get it working again.

Ads

An Introduction to Ooze Pen Blinking Green Troubleshooting

Before jumping into the specific issues, here is a quick primer on the Ooze vape pen and diagnosing problems:

  • The Ooze pen is a popular pre-filled THC or CBD oil vape pen.
  • It has a simple battery and atomizer design with button-activated heating.
  • The light on the battery will blink green in a specific pattern to indicate issues.
  • The most common causes include battery charge, cartridge connection, clogs, or defects.
  • With some basic troubleshooting, most blinking light issues can be resolved.

So in summary – a blinking green light is the Ooze pen’s way of telling you something needs attention before it will function properly again. By counting the blinks and diagnosing the issue, you can get back to vaping in no time.

Why the Ooze Pen Blinks Green – An Overview of Potential Issues

There are four primary reasons an Ooze pen will blink green during use:

  1. Low Battery Charge – The battery needs recharging when green blinking is observed.
  2. Faulty Cartridge Connection – The cartridge isn’t making solid contact with the battery.
  3. Clogged Cartridge – Debris, thick oil, etc is blocking the cartridge intake.
  4. Internal Short Circuit – Rare but can happen if the battery or cartridge is defective.

Those are the most common issues that will cause blinking. By methodically troubleshooting each potential cause, you can diagnose why your pen won’t hit.

Ads

Now let’s dive into greater detail on solving each specific issue, starting with battery charge status.

Battery Status Issues Causing Blinking Lights

The simplest reason your Ooze pen is likely blinking green? A low charge battery that needs rejuicing. Here’s how to diagnose and fix that issue:

How to Check Battery Charge Level?

First, confirm if battery life is indeed the culprit. Here are two ways to check:

  • Inspect Charge Light Color – The battery button light indicates the charge level. Green = good. Red = charging. If blinking green when pressed, the battery is low.
  • Attach to Charger – Screw the battery onto the USB charger. Green light = fully charged. The red light is still on = needs more charging.

Reasons Why Low Battery Charge Causes Blinking

If you’ve confirmed the charge is low, here is why it causes that frustrating blinking when trying to use the pen:

Ads
  • The battery lacks sufficient power to heat the atomizer properly
  • Voltage drops too low to maintain connection with the cartridge
  • Built-in safety feature to indicate the battery is drained

Essentially, the blinking alerts you the battery is drained and safely prevents usage until recharged.

Tips for Properly Charging Your Battery

Recharging the battery is the solution here. Follow these tips for optimal charging habits:

  • Use the supplied USB charger and avoid phone/computer ports – slower/lower amperage
  • Don’t overcharge – most pens only need 1-2 hours max to fully recharge
  • Make sure the connection with the charger is secure – loose fit = poor contacts
  • Keep batteries stored safely – prevents accidental discharge if buttons are pressed

By maintaining good charging practices and not letting the battery over-drain, you’ll prevent blinks from insufficient charge and maximize battery longevity.

Cartridge Connection Issues

The second most common reason for blinking lights on the Ooze pen – is cartridge connection problems. Here’s how to troubleshoot:

Ads

Carefully Inspect the Cartridge Connection

First, double-check that the cartridge is properly attached. Carefully unscrew and re-attach, ensuring it is securely threaded. Also, look for:

  • Debris or smudges on the cart threads blocking full contact.
  • The center nipple/contacts inside the battery socket for gunk or damage.

Clean any areas preventing smooth mating contact between battery and cartridge.

Attempt Gentle Cartridge Wiggling

With the cartridge attached, gently wiggle while hitting the pen. If green blinks with movement, the cartridge isn’t making consistent contact.

Try Alternative Cartridges

Finally, attempt connection with a known good cartridge. Persistent blinking confirms an issue with the battery port itself.

Ads

Cartridge Clogs Causing Blinks

Aside from connection, cartridge issues can also lead to blinking lights:

Inspect Internals for Congestion

Carefully check inside cart mouthpieces and nipples for congestion and stuck debris impeding airflow.

Common clogging culprits include:

  • Burnt wick particles
  • Thick, sludgy oil failing to wick properly
  • Foreign matter introduced into the tank
  • Old degraded hardware

Use a flashlight for illumination and a slim picking device to gently clear any clogs found.

Ads

Confirm Proper Cartridge Absorption

After cleaning, ensure the intake holes at the bottom are clear and oil flows smoothly when upside down. Place upright and lightly pull to confirm suction and oil being pulled.

If weak suction or oil is not being absorbed, the cart itself has failed and needs replacing.

Short Circuits Causing Blinking Lights:

Finally, while less common, a dangerous short circuit can also lead to green blinking:

Be Aware of Damage Causing Electrical Shorts

Both cart failure and battery defects can lead to dangerous internal shorts. Signs include:

Ads
  • Rapid blinks in repeating patterns.
  • The battery quickly drains when idle.
  • Burnt smells emanating from the device.
  • Uncomfortable heat when hitting.

Cease vape pen use immediately if short circuit symptoms arise. While rare, cheap vape batteries can overheat and damage equipment or cause bodily harm. Replace defective units.

In summary, blinking lights are trying to tell you something needs attention – whether the low charge, connection problems, clogged cartridges, or at worst – damaged electronics short-circuiting.

Now let’s look at some very specific ooze pen blinking patterns.

Ooze Pen Blinking Green 10, 20 Times – What It Indicates

Beyond just steady blinking, the number of green flashes in a sequence also conveys specific issues:

Ads
  • 10 Blinks – Low battery charge warning
  • 20 Blinks – Short circuit protection triggered
  • 5 Blinks – Bad cartridge connection

So count the exact sequences of flashes when troubleshooting. For example:

  • 10 green blinks when pressing the button = battery needs recharging
  • 20 rapid blinks = do not use and replace damaged pen

Similarly, combo red + green blinking indicates overheating from cartridge overuse. Let the unit fully cool down before continued use.

Pay close attention to exact blinking sequences to better pinpoint root causes before they become permanent damage.

Cartridge Care Guide – Proper Use and Maintenance

To prevent common cartridge issues use these best practices:

Ads
  • Avoid Combustion Hits – Run at low temp/voltage to prevent burning. Burnt hits damaged carts.
  • Gently preheat oil – Thick distillates need warming to properly wick.
  • Small pre puffs – prime carts with short 1-2 second puffs before longer inhales
  • Don’t overtighten when connecting carts
  • Check for degradation – cloudy, dark, acidic oil needs changing

With attentive care in cleaning, filling, heating, and storage, cartridges will last longer and need fewer troubleshooting blinking light scenarios.

Frequently Asked Questions about Ooze Pens

Let’s review the most common questions about diagnosing Ooze pen issues:

  • Q: Why does my Ooze pen keep blinking when I try to use it?

A: The blinking light typically indicates a battery charge issue, faulty cartridge connection, clogged cart, or internal electrical short needing troubleshooting.

  • Q: How can I stop the constant green blinking light when hitting?

A: First fully recharge the battery, then ensure the cartridge is making clean contact, clear any clogs and finally test with known good carts. Blinking signifies an underlying issue needing fixing before vaping.

Ads
  • Q: Is it safe to keep using my Ooze pen if the light blinks?

A: Do NOT keep using it if blinking, especially with repeated quick green blinks indicating potential short circuits. Troubleshoot and then replace any damaged parts.

  • Q: What causes the green blinks after leaving the pen sitting awhile?

A: Extended idle periods lead to battery discharge, oil receding in carts, and debris accumulation – all factors leading to blinks after sitting unused.

  • Q: Can faulty chargers or overcharging cause blinking lights?

A: Yes, low-quality chargers providing inconsistent power can damage batteries causing blinks and shorts. Never overcharge beyond 1-2 hours max.

More Related Guides:

Conclusion:

Ads

Hopefully, now you have confidence in troubleshooting why your Ooze pen is suddenly blinking instead of properly heating your oils.

By methodically considering battery life, cartridge connection, clogs, and shorts then testing fixes – you can isolate the root causes of most issues. Pay attention to the exact blinking light patterns for extra insight into what requires attention.

With attentive battery charging habits, careful cartridge maintenance, debris-free threading, and the use of quality replacement parts, an Ooze pen can provide reliable service in the long run.

But when those frustrating green and red blinking lights appear, this guide has you covered on getting your pen back to smoothly vaping again!

Ads

Let us know in the comments if you have any other great Ooze pen troubleshooting tips!

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *